
01733 301972
OPEN mon-fri: 9AM-5PM
saT & sun: CLOSED
electric roller doors | composite doors | aluminium entry doors | upvc doors & more


OUR DOORS
Made in our own factory here in Whittlesey, our electric roller garage doors have an automatic operation as standard, supplied with two remote controls and control box inside your garage.
We only use "tried and tested" high quality aluminium products, that are far superior to others within the UK marketplace.
​
Our doors are safe, secure and all parts are compliant.
​​
Space saving as it lifts vertically, so it can be easily opened even when you park right up close to the door. The curtain then rolls into the fully enclosed top box. Claim back your garage!!
​​
Low maintenance, simply wash/wipe down to remove surface dirt and grit. No more need to paint or lubricate. Made from powder coated aluminium that's able to withstand the harshest of weather conditions.
​​
All Patriot Roller doors have an internal manual override as standard, so the door can be opened in the event of a power cut. An external manual override is available as an option.
​​
Our doors can be as wide as 4900mm, so there's a door to suit most garages.
​​
You now have the choice of either the 56mm or 78mm lath (or slat) sizes in 19 colours and finishes.
​​
All our garage door laths are insulated using CFC free foam, which not only increases thermal efficiency but also helps with strength and insulates against sound. The bottom rail on the curtain is also fitted with a large rubber seal that helps prevent any drafts and water entering your garage.
​
We can also offer a choice of 6 guide rail and top box colours.
​​
Additional extras are available, such as safety photocells, rocker switches, keypad and key switch entry etc. Please ask for details.
​​
Please note that our doors simply work off a standard UK plug, therefore we need a power supply (standard socket) close to the door OR an adequate extension cable to be supplied.
​​
​​
​​
​​
TO PAIR THE REMOTES TO THE ELLARD GENESIS CONTROL PANEL AFTER BATTERY CHANGE (CR2032), PLEASE CLICK THE LINK BELOW FOR INSTRUCTIONS;
​
​https://youtube.com/clip/Ugkx1UjTpzeGom-6e-QgrWsTISA79UutKdgv?si=0grnz61yvuN2BGZV

DESIGN YOUR GARAGE DOOR IN 4 EASY STEPS
(SIMPLY MAKE A NOTE OF THE OPTIONS CHOSEN & FILL IN THE ONLINE FORM)
STEP 1 - CHOOSE YOUR DOOR SIZE

PAT 56 DOOR
This door is the most popular size (56mm x 12.8mm lath - inc curve) with a width of 2500mm or under.
​
Will be hold to run when closing (safety device can be chosen as an optional extra)
The box is a compact 205mm x 205mm to suit most garages (250mm box available).
The box usually give more clearance than the existing door being removed.

PAT 78 DOOR
This door is usually between 2500mm and a massive 4900mm in width and is made using the 78mm x 18mm lath.
​
THE PAT 78 CAN BE MADE IN STANDARD WIDTH DOORS AND SHUTTER SIZES.
Doors will have brakes and safety devices as standard.
The box is a sturdy 300mm x 300mm that can usually go behind the lintel if the roof allows.